1x2 Ports 900um Loose Tube Fused WDM Jacket SMF28e Fiber 1m Bare
fiber length
Basic Information:
980/1060nm Fused WDM Module can combine 980nm and 1060nm signals
into one fiber or separate 980nm and 1060nm signals into two
fibers. It is used for optical amplifiers.
For 1×2 or 2×2 couplers/splitters, the orange lead designates the
primary input, the other orange designates the primary output.
Secondary input and output fibers are natural. For a non 50/50
coupling ratio, the larger percentage coupling ratio will always be
on the other orange lead.
We have different types of fused biconical taper machines, delivery times can be guaranteed.
.
2×2 Fused WDM Benefit&Features:
Fused WDM Benefit&Features:
* GR-1209-CORE Requirements for passive optic components
* GR-1221-CORE Reliability assurance requirements for passive
optical components
* GR-326-CORE Requirements for single-mode optical connectors sand
jumpers assemblies
* TIA-604 Fiber optic connector interpretability standard
* ROHS Directive on the restriction of hazardous substances
2×2 Fused WDM Applications:
- Passive Optical Network (PON)
- Optical Amplifiers
- Optical Access Networks/LAN
- Monitoring Systems
- Optical Fiber Sensor
- Medical OCT Devices
- Datacenters
Specifications& Technology Parameters:
| Parameter | 980/1550nm WDM or 1060/1550nm WDM | 1310/1550nm WDM | 1480/1550nm WDM |
| Fiber Type(dB) | Corning HI1060flex or OFS BF05635-02 | SMF-28e |
| Operating Wavelength(nm) | 980 & 1550 | 1060 & 1550 | 1310 & 1550 | 1480 & 1550 |
| Operating Bandwidth(nm) | ±10/20 | ±15 | ±15 |
| Grade | P | A | P | A | P | A | P | A |
| Insertion Loss(dB) | ≤0.15 | ≤0.25 | ≤0.30 | ≤0.40 | ≤0.2 | ≤0.3 | ≤0.3 | ≤0.35 |
| Isolation(dB) | ≥20 | ≥18 | ≥20 | ≥18 | ≥25 | ≥18 | ≥25 | ≥18 |
| PDL(dB) | ≤0.05 | ≤0.1 | ≤0.05 | ≤0.1 | ≤0.05 | ≤0.1 | ≤0.1 | ≤0.1 |
| Directivity(dB) | ≥55 |
| Operating Temperature(℃) | -40 ~ +85 |
* The above specification is excluding the connector
* Other specifications can be made on customer requires
Ordering Information:
| WDM- | N- | XX- | XX- | X- | XX- | XX- | X |
| | 95:980&1550nm 135:1310&1550nm 65:1060&1550nm
45:1480&1550nm | 01: :SMF-28e
02: HI1060flex,
03: OFS BF05635-02 | 1:1m
X:customization | 25:250μM Fiber
09:900μM loose Fiber 20: 2mm cable
30: 3mm cable | SC:SC/UPC
SA:SC/APC
......
00:No connector | A: A
B: B
C: C |
| Grade | Operation Wavelength | Fiber Type | Fiber Length | Pigtail Type | Connect Type | Dimension |
WDM Cable Types:
1. Single-mode fibers allow one mode to propagate.
2. Multimode fibers support the propagation of multiple modes.
3. Wavelength range is the range of wavelengths the WDM will
operate in.
4. Bandwidth, also called channel spacing, is the size of the
windows in nm.
5. Channel spacing is the center-to-center difference in frequency
between neighboring channels. Two hundred GHz corresponds to .4 nm
spacing, 100 GHz corresponds to .2 nm spacing, and 50 GHz
corresponds to .1 nm spacing.
6. Number of channels is the number of channels the device has to
send information. This number can range from 4 to 160 with design
enhancements adding more channels.
7. Insertion loss is the attenuation caused by the insertion of
wavelength division multiplexers (WDM) in an optical transmission
system.
Polarization-dependent loss is the maximum deviation in insertion
loss across all input polarization states.
Wuhan Geehe Comm Service:
-- Continuous improvement; accepting new challenges
-- Innovating new processes, and creating new products for the
benefit of our customers
-- Free samples for testing
-- Factory inspection, also accept the third party inspect
-- Younger Team
